» Store » Suppressors » .308 / 7.62MM Rifle » All » Thunder Beast Ultra 9 CB

Thunder Beast Ultra 9 CB

Price: $1,120.00
MSRP: $1,195.00
SKU: TBAC Ultra 9 CB Blk 5/8-24

SHOWN HERE IN Black! (OD Green and FDE by Special Order only)

The ULTRA 9 is our full-size precision rifle suppressor. It is best for applications where maximum suppression is key. The ULTRA 9 is available in .30 caliber and 6.5 mm caliber. The .30 caliber version is best for maximum flexibility for .223 up to .300 RUM. The 6.5 mm caliber version optimizes suppression performance on 6.5 mm and smaller calibers.

 

The ULTRA 9 will suppress a typical .308 bolt-action rifle down to approx 132-134 dB. The ULTRA 9 will suppress a typical .300 Blackout bolt-action rifle to about 118-120 dB shooting subsonic ammunition. It also has very little or no "first round pop" (FRP) in most applications. When shot on a .260 Remington or 6.5 Creedmoor, the 6.5 mm Ultra is 2-3 dB quieter than the .30 caliber Ultra on the same rifle.

 

The ULTRA 9 weighs just 11.9 ounces.

 

ULTRA SERIES

 

The ULTRA series represents a revolutionary improvement in titanium precision rifle suppressors. We took everything we've learned over the last half decade building the best precision rifle suppressors in the world and put it into the ULTRA design. The ULTRA series offers unprecedented light weight and class-leading suppression levels.

 

Compared to the prior 30P-1/30CB9 series, the ULTRA series is 25-30% lighter, 4-5 dB quieter, and much stronger. The ULTRA series holds the same precision and repeatability as the 30P-1/30CB series.

 

The .30 caliber ULTRA series includes three suppressors: 9-inch, 7-inch, and 5-inch versions are available. They are available in either our Compact Brake (CB) Mount (a "thread over muzzle brake" type mount) or in a direct thread mount.

 

The CB mount and direct thread mount have equivalent accuracy and repeatability.

 

With the CB mount, the suppressor mates to a conical shoulder on the brake and locks up rock solid and extremely tight. In direct thread configuration, the ULTRA suppressors use a heat-treated 17-4 thread insert and initial blast shield. The ULTRA series suppressors also have the flexibility to be changed from direct thread to CB mount and vice versa via a simple factory service operation, in case your needs change. This is accomplished by removing or replacing the default brake from the direct thread version.

 

The ULTRA series is constructed of titanium with a fully-welded core. This material and construction provide a great strength to weight ratio. It can take whatever your precision rifle can dish out.

 

The ULTRA baffle stack was completely redesigned, but retains the principles that made the 30P-1 stack such a great precision and long-range suppressor. Thunder Beast Arms Corp suppressors have racked up impressive results at long-range field shooting events nationwide, and have been the most popular suppressor used in the Precision Rifle Series (top 50 competitors) for three years running.

 

Many long-range shooters prefer shooting suppressed because the muzzle blast and concussion is eliminated, while the recoil impulse is reduced and smoothed out over time. The net result is that the rifle is easier to shoot and it's easier to make hits. Communication with your spotter is easier because the need for hearing protection is reduced.

 

The .30 cal ULTRA was designed around .308 for maximum flexibility and is rated up to .300 Winchester Magnum (18" barrel), but it's the ideal suppressor for the most competitive mid-sized cartridges for long-range shooting such as .243 Winchester .260 Remington, 6.5 Creedmoor, 6.5x47 Lapua, 6.5-284 Norma, and 7mm Remington Magnum & WSM.

 

Special Features

 

Direct thread attachment option

 

CB series muzzle brake and flash hider attachment option

 

Ionbond DLC coating on CB muzzle devices

 

Conical shoulder surface on CB mount

 

100% titanium construction

 

360-degree fully-welded baffle core

 

Helical Baffle Technology

 

Magnum rated

 

Rock-Solid POI Repeatability

 

Application Notes

 

Minimum barrel lengths:
   .300 Blackout: 8"
   6.8 SPC, 7.62x39: 10" *
   .223 Rem, 5.56, 6.5 Grendel: 11.5" *
   .308 Win: 14.5" *
   7mm RM, .300 WIN MAG: 18"
   7mm RUM, .300 RUM: 20"
Please contact tech support for:
   7mm cal loads exceeding 90 powder grains,
   .30 cal loads exceeding 100 powder grains
For questions about a particular rifle/load combination please contact us.
* SBR use in these calibers, CB brake mount or Direct Thread recommended.

 

Please note that thermal input will be higher with shorter barrels. Ultra series suppressors should be kept under 800 degrees F.

 

Specifications

 

Calibers

.30 caliber, up to .300 RUM
6.5 mm caliber, up to 6.5 mm / .264" caliber

Material

Titanium

Length

9 inches

Diameter

1.5 inches

Mounts

CB series brake or flash hider, and
Direct Thread

Weight

11.9 ounces (CB mount)
13.7 ounces (direct thread)

Threads (Brake or Direct Thread)

1/2-28*, 5/8-24, 9/16-24, 3/4-24, 3/4-28, M18x1.0, M18x1.5
* Note: The 1/2-28 brake has part number 223CB-BRK:1/2-28 and has a .223 caliber aperture!

Finish

Black CeraKote; OD Green or FDE available

Brake Material

Heat-treated 17-4 stainless

Brake Finish

Ionbond DLC

Use

Precision/Long-range rifle, bolt or semi-auto

» Continue Shopping

Related Items:

NFA Tax $200
Price: $206.00
MSRP: $206.00
» details